One of the easiest ways to make a dramatic change in a room is to add a backsplash. In this article we detail how to use a backsplash in a bath remodel.
One of the biggest advantages to choosing Fasade or Aspect backsplash products for a bath remodel is that the project often takes less than one day. Fasade 18′ x 24′ decorative backsplash panels can be installed with double-sided tape or construction adhesive. Made of decorative vinyl, their flexibility and size make them easy to handle and install. They’re also available in 4’x8′ wall panels, which is great for accent walls or larger areas. Fasade panels are an affordable alternative to traditional grout-applied tile projects. They are available in a number of traditional and contemporary styles and colors.
Aspect tiles are another great product to consider. They just peel and stick for instant style.There is no need to worry about the mess of grout or the hassle and expense of hiring a tile installer, and they are available in metal, glass and stone.
Aspect metal tiles are offered in 3’x6′ subway style and matted formats in stainless, champagne, copper and bronze finishes. Glass tiles are also offered in subway and matted styles in a variety of colors. Aspect stone tiles are made of real stone, but are easy to cut with tin snips or a utility knife. They are offered in nine colors to match any decor.
For creative inspiration on how to use backsplash in a bath remodel, visit our photo galleries.
Do you want to update your kitchen without spending a lot of time and money? If that sounds appealing, a DIY kitchen backsplash is just the project.
Installing a Fasade decorative vinyl backsplash is one of the easiest DIY kitchen backsplash projects. Measuring 18” x 24” each, these decorative backsplash panels are available in a range of styles and finishes to match any decor. Lightweight and flexible, they install with double-sided tape or tube adhesive, eliminating the hassle of grout.
To install Fasade backsplash, first prepare the area to be covered so that it is clean, dry, flat, smooth and free from dust, grease, etc. You may choose to paint the wall where the edge of panel meets cabinetry, or install edge J-trim to avoid any gaps that show through. Do a dry layout first to determine where your panels will go. You can use a pair of scissors or tin snips to cut the panels to the necessary size.
Determine if you are going to install the panel using double-sided tape or tube adhesive. Regardless of which method you use, you will want to clean the backside of the panels using a paper towel or cloth and isopropyl alcohol. If using trim, slide the trim piece onto the edge of the panel. Apply glue or adhesive strips to the back and press the panel firmly into place when alignment is correct and squeeze out excess air. Finish installing the rest of the panels in the same fashion.
Note: Prior to installation, it is important to understand the overlap feature of each panel. Each panel has two 1/2″ flat edges (the longer flat edge is the top of the panel and shorter flat edge is the right side of the panel). Arrange all panels this way so additional panels can be added to the top or right side of any panel. When overlapping 4 panels, it is necessary to cut a 1/2″ notch in panels 2 and 3 to avoid an overlap buildup that causes a “bump.”
For ideas on how to use Fasade decorative backsplash panels, visit our galleries page.
Thinking of completing a DIY kitchen backsplash project? Let us know what you think in the comments!
Does your refrigerator work fine but look dated? Can’t afford to replace it right now? You’re not alone.
Recently a customer submitted before and after photos of her refrigerator, upgraded with Fasade panels. Wondering if there was more of this type of thing out there, I hopped on Pinterest, where my suspicions were confirmed. There are a slew of boards where people share their ideas to give their refrigerators budget-friendly makeovers and many of them are very creative and fun. Who knew? If you want to give your refrigerator new life, but don’t want to spend a lot of money doing it, there are a few methods to choose from. Check out these refrigerator makeover ideas for less:
Appliance Paint
Available in brush- or spray-on varieties, specialty appliance paints are designed to cover plastic or metal. Some are also heat resistant, which you need to use for ovens or range hoods. You can choose from matte or glossy finishes, or even chalkboard for a really unique look.
Peel and Stick Paper
Inexpensive and available at most home improvement stores, peel and stick paper comes in a variety of colors and designs. Julie used a stainless steel contact paper and wrote about the process here.
Magnetic Covers
If you want something a little more durable than paper, look into magnetic covers. Fridge Fronts is an online store that offers dozens of designs and styles for any type of refrigerator format, whether you have a top-mount freezer, French style or side-by-side doors. They’re also available for dishwashers.
Fasade Panels
Of course, Fasade faux tin panels are another great option. Available in traditional, modern and industrial styles and dozens of colors, they’re available in more than 250 configurations. Whether you use them as backsplash, on the ceiling or on your refrigerator, Fasade panels offer the industrious DIYer a fun project that easily updates the look of your kitchen without costing an arm and a leg.
What do you think of these refrigerator makeover ideas for less? Let us know in the comments!
